Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-736
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
TCP Messages
Error Message TCP-3-INVALIDPARAM Format: %s: Invalid %s
Explanation Invalid parameter.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-IP_PROT_UNKNOWN Format: %s: Unknown protocol in IP message %d
Explanation IP sent a packet with unknown protocol ID.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-MBUF_COPY Format: %s: Unable to do m_copyback
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-3-MSG_MAJOR_UNKNOWN Format: %s: Unknown message major %d, minor %s
Explanation Unknown major type.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-MSG_MINOR_UNKNOWN Format: %s: Unknown minor message type %d from
%s
Explanation Unknown mior type.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-MTS_RESPOND Format: Error returned from mts_send_response(),
errno: %s
Explanation TCP called an MTS API which returned an error.
Recommended Action No action is required.
Error Message TCP-3-NOMBUF Format: %s: Unable to get mbuf
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English