Send document comments to nexus7k-feedback-doc@cisco.com
2-735
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
TCP Messages
Error Message TCP-2-TSP_INIT Format: %s: Could not initialize tsp locking library
Explanation Could not initilize locking library.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
TCP-3
Error Message TCP-3-ALLOC Format: Error returned from calloc(), errno: %s
Explanation TCP called a calloc API which returned an error.
Recommended Action No action is required.
Error Message TCP-3-BADSIG Format: %s: Should not have received signal %d
Explanation Unexpected signal.
Recommended Action No action is required.
Error Message TCP-3-CLIENT_DELETE Format: %s: Could not delete client \%s\ pid %d
error %s
Explanation Cannot delete client from clients list.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-CLIENT_NULL Format: %s: Client struct for pid %d not found
Explanation Cannot find client for pid.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-DOMAININIT Format: %s: domaininit: %s sw[%d] has no usrreqs
Explanation Bkoken domain structure.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-FORK_ERROR Format: %s: Parent of the forked child did not create
state for child %d:%d
Explanation Parent process did not create state necessary for child process registeration.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
