Send document comments to nexus7k-feedback-doc@cisco.com
2-98
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DEVICE-ALIAS Messages
Error Message DEVICE-ALIAS-3-MERGE_ACTIVATION_FAILED: [chars]
Explanation An error has occurred while activating the merged database. [chars] indicates the reason
for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_ACTIVATION_REJECTED: [chars]
Explanation Merge activation request received from remote switch is rejected. [chars] indicates the
reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_FAILED: [chars]
Explanation An error has occurred during merge operation. [chars] indicates the reason for failure.
Recommended Action Compare device-alias configuration with the other switches in the fabric,
resolve the conflicts if any and commit the changes.
Error Message DEVICE-ALIAS-3-MERGE_MREQ_REJECTED: [chars]
Explanation MREQ received from remote switch is rejected. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_MRESP_REJECTED: [chars]
Explanation MRESP received from remote switch is rejected. [chars] indicates the reason for
failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-3-MERGE_VALIDATION_FAILED: [chars]
Explanation An error has occurred while validating the merged database. [chars] indicates the
reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
