Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-28
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ARP Messages
Error Message ARP-2-API_INIT Format: Failed to initialize %s API
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-CLI_INIT Format: Failed to initialize CLI
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-DUP_SRC_IP Format: Source address of packet received from %s on
%s(%s) is duplicate of local, %s
Explanation There may be another router on this network that is configured with the same IP
address.
Recommended Action Check all routers on the interface for a misconfiguration.
Error Message ARP-2-DUP_SRCIP Format: Source address of packet received from %s on
%s is duplicate of local, %s
Explanation There may be another router on this network that is configured with the same IP
address.
Recommended Action Check all routers on the interface for a misconfiguration.
Error Message ARP-2-INIT_FAIL Format: Initialization failure
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-MQ_OPEN Format: Failed to open message queue %s: %s
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-MQ_RECV Format: Message queue receive failed on %s queue: %s
Explanation An unexpected fatal error has occurred.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English