Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-29
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ARP Messages
Error Message ARP-2-MTS_BIND Format: Failed to do mts_bind for %s: %s
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-MTS_RECV Format: MTS queue receive failed on %s queue: %s
Explanation An unexpected fatal error has occurred.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-SET_SCHED Format: Failed to set policy or priority
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-SHM_ATTACH Format: Failed to attach %s shared memory
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-SVR_REG Format: Failed to register as a client of %s
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-SYSMGR_NOTIFY Format: Bad notification from sysmgr for %s
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-SYSMGR_QUERY Format: Failed to query sysmgr for %s
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English