Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-572
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RLIR Messages
RIP-6
Error Message RIP-6-MTS_UNKNOWN_MSG Format: Received unknown MTS message with opcde
%d, dropping it
Explanation RIP received an unknown message. The message is dropped
Parameters: Opcode ...
Recommended Action No action is required.
Error Message RIP-6-SYSMAN_CLEANUP Format: Terminated by SYSMAN cleanup signal ;
Explanation: System Manager sent a cleanup signal to RIP to exit the process
Explanation The system has detected an error.
Recommended Action No action is required.
Error Message RIP-6-UNK_DEB_FLAG Format: Ignore unrecognized debug flag \%s\
Explanation An unknown command line debug option was entered
Parameters: Debug Flag ...
Recommended Action No action is required.
RLIR Messages
This section contains the RLIR messages.
RLIR-2
Error Message RLIR-2-DRLIR_REJECT: DRLIR rejected: [chars]: fcid [chars], reason
code [dec]
Explanation DRLIR rejected: [chars] fcid [chars] reason code [dec].
Recommended Action No action is required.
Error Message RLIR-2-FC2_FAILED: RLIR FC2 operation failed: [chars]: [chars]
Explanation RLIR FC2 operation failed: [chars] [chars].
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English