Send document comments to nexus7k-feedback-doc@cisco.com
2-211
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCS Messages
Error Message FCS-2-NO_RESPONSE: Retried maximum number of times for [chars] to
domain [dec] in VSAN [dec]
Explanation Maximum number of retries completed for [chars] form domain [dec] in VSAN [dec].
Recommended Action No action is required.
Error Message FCS-2-PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].[dec],
expected version [dec].[dec].[dec]
Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service,
[dec].[dec].[dec] is the current version number, and [dec].[dec].[dec] is the expected version.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message FCS-2-RANDNUM_FAIL: [chars]
Explanation There was a critical error during random number generation. [chars] indicates details
of the error.
Recommended Action No action is required.
FCS-3
Error Message FCS-3-BAD_CT_FRAME: Invalid FCS frame: [chars] received from [hex]
Explanation The system has detected an invalid FCS FC-CT frame with [chars] received from FC-ID
[hex].
Recommended Action No action is required.
Error Message FCS-3-DB_ERR: [chars]
Explanation An error has occurred during an FCS database operation. [chars] indicates the reason
for the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message FCS-3-INIT_FAIL: [chars]
Explanation An error has occurred during FCS Initialization. [chars] indicates the reason for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
