Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-828
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
XBAR_CLIENT Messages
Error Message XBAR-5-XBAR_SW_INIT_FAIL: Xbar [[dec].[dec]] reported failure durinig
sw intialization return_code [hex] ([chars]).
Explanation The supervisor has experienced an crossbar setup failure.
Recommended Action No action is required.
XBAR_CLIENT Messages
This section contains the XBAR_CLIENT messages.
XBAR_CLIENT-2
Error Message XBAR_CLIENT-2-MEM_FULL: memory allocation failed
Explanation Process xbar_client failed to allocate memory.
Recommended Action Please examine the xbar-client event-history for more information.
Error Message XBAR_CLIENT-2-PROC_DN: exiting: [chars].
Explanation Process xbar_client is exiting.
Recommended Action Please examine the xbar-client event-history for more information.
Error Message XBAR_CLIENT-2-PROC_INITFAIL: initialization failed due to [chars]
Explanation Process xbar_client failed initialization.
Recommended Action Please examine the xbar-client event-history for more information.
Error Message XBAR_CLIENT-2-PROC_INITFAIL: Process initialization failed due to
[chars].
Explanation XBAR_CLIENT process has failed initialization.
Recommended Action Enter a 'show xbar-client event-history' to collect more information.
XBAR_CLIENT-3
Error Message XBAR_CLIENT-3-IPC_MSGERR: failure processing IPC message [dec], error
code = [dec]
Explanation Process xbar_client failed to process IPC message.
Recommended Action Please examine the xbar-client event-history for more information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English