Send document comments to nexus7k-feedback-doc@cisco.com
2-164
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ETH_PORT_CHANNEL Messages
Error Message ETH_PORT_CHANNEL-5-PORT_REMOVED: [chars] removed from [chars]
Explanation Ports are removed from a port channel.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_SUSPENDED: [chars]: [chars] is suspended
Explanation Port is suspended in a port channel.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-5-PORT_UP: [chars]: [chars] is up
Explanation Port comes up in a port channel.
Recommended Action No action is required.
ETH_PORT_CHANNEL-6
Error Message ETH_PORT_CHANNEL-6-RESYNC: resyncing [chars] with all modules
Explanation Resynchronizehronizehronizationmodules with sup after an error or switchover.
Recommended Action No action is required.
ETH_PORT_CHANNEL-7
Error Message ETH_PORT_CHANNEL-7-GSYNC_DONE: global synchronization is done
Explanation The system has detected a manager finished global synchronization.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-7-GSYNC_REQ: requesting global synchronization
Explanation The system has detected a manager requested a global synchronization from active sup.
Recommended Action No action is required.
Error Message ETH_PORT_CHANNEL-7-START_ACTIVE: started in active mode
Explanation The system has detected a manager started in active mode.
Recommended Action No action is required.