Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-279
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IPQOSMGR Messages
IPFC-6
Error Message IPFC-6-STARTING: IP Over Fiber Channel service started
Explanation The service has successfully started.
Recommended Action No action is required.
IPQOSMGR Messages
This section contains the IPQOSMGR messages.
IPQOSMGR-2
Error Message IPQOSMGR-2-QOSMGR_HA_FAILURE: Failed to do high availability
operation: [chars].
Explanation The system has failed to do a high availability operation. [chars] is the reason.
Recommended Action No action is required.
Error Message IPQOSMGR-2-QOSMGR_INIT_FAILED: Initialization failed for QoS Manager:
[chars], reason: [hex].
Explanation Initialization failed for QoS Manager due to [chars], reason: [hex].
Recommended Action No action is required.
Error Message IPQOSMGR-2-QOSMGR_MTS_FAILURE: Failed to do MTS operation: [chars].
Explanation The system has failed to do an MTS operation. [chars] is the reason.
Recommended Action No action is required.
Error Message IPQOSMGR-2-QOSMGR_MTS_REGISTRATION_FAILED: MTS options setting to
[hex] failed for opCode: [dec].
Explanation The The The MTS options setting to [hex] failed for opCode: [dec].
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English