Send document comments to nexus7k-feedback-doc@cisco.com
2-212
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCS Messages
Error Message FCS-3-MTS_ERR: [chars]
Explanation An error has occurred in processing of an MTS message. [chars] indicates the error that
occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message FCS-3-NO_MTS_RESP: [chars]
Explanation There was no response to an MTS request. [chars] indicates details of the MTS
message.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message FCS-3-NO_REMOTE_RESP: No response for request [chars] from domain
[dec] in VSAN [dec]
Explanation There was no response to an FC2 request. [chars] indicates FCS request [dec] indicates
the remote domain and [dec] the VSAN ID.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message FCS-3-OTHER_ERR: [chars]
Explanation An FCS generic error occurred. [chars] indicates the description of the error.
Recommended Action No action is required.
Error Message FCS-3-PSS_ERR: [chars]
Explanation An error has occurred during an FCS PSS operation. [chars] indicates the PSS operation
that caused the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message FCS-3-SOCK_ERR: sd: [dec], [chars]
Explanation An FC-2 Socket has failed occurred on socket-ID [dec]. [chars] indicates the reason for
failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
