Send document comments to nexus7k-feedback-doc@cisco.com
2-531
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT_CHANNEL Messages
PORT_CHANNEL-2
Error Message PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not responding or
returning error
Explanation A module is reset for not responding or returning error.
Recommended Action No action is required.
PORT_CHANNEL-3
Error Message PORT_CHANNEL-3-COMPAT_CHECK_FAILURE: [chars] is not compatible
Explanation Compatibility check failed when adding ports to port channel.
Recommended Action Make sure the compatibility parameters are consistent while adding ports to
port channel, or use force option.
Error Message PORT_CHANNEL-3-GENERAL_ERROR: [chars]
Explanation General error.
Recommended Action No action is required.
Error Message PORT_CHANNEL-3-LACP_ERROR: [chars]
Explanation LACP error.
Recommended Action No action is required.
Error Message PORT_CHANNEL-3-MSG_SEND_FAILURE: failed to send [chars] to sap [dec]:
[chars]
Explanation The system has failed to send a message.
Recommended Action No action is required.
Error Message PORT_CHANNEL-3-PORT_CHANNEL_NOT_FOUND: [chars] is not found
Explanation Cannot find port channel in its database, which indicates an inconsistency with an
external component.
Recommended Action No action is required.
To Next Page
Loading...
