Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-74
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
CDP Messages
Error Message CDP-3-MTSERROR: [chars]
Explanation The CDP daemon encountered an MTS error. [chars] specifies the context where the
error occurred.
Recommended Action No action is required.
Error Message CDP-3-PKTRECVFAIL: Failed to receive packet - [chars]
Explanation The system has failed to receive the packet. [char] identifies the reason.
Recommended Action No action is required.
Error Message CDP-3-PKTSENDFAIL: Failed to send packet, interface [hex] - [chars]
Explanation The system has failed to send the packet. [dec] identifies the interface and [char]
identifies the reason.
Recommended Action No action is required.
Error Message CDP-3-PSSERROR: [chars]
Explanation The CDP daemon encountered a PSS error. [chars] specifies the context where the
failure occurred.
Recommended Action No action is required.
Error Message CDP-3-SOCKBINDFAIL: Failed to bind to raw socket, interface [hex] -
[chars]
Explanation The system has failed to bind to a raw socket. [dec] identifies the interface and [char]
identifies the reason.
Recommended Action No action is required.
Error Message CDP-3-SOCKOPENFAIL: Failed to open socket for receiving raw 802_2
packets - [chars]
Explanation An attempt to open a socket for receiving raw 802_2 packets failed. [char] identifies
the reason.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English