Send document comments to nexus7k-feedback-doc@cisco.com
2-540
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PRIVATE_VLAN Messages
PPM-3
Error Message PPM-3-ALLOC_FAILED: Failed in File:[chars] Line:[dec] for type [dec]
size [dec]
Explanation The SDM process could not allocate heap memory in File:[chars], at line:[dec], for
memory-type:[dec] of Size:[dec].
Recommended Action No action is required.
Error Message PPM-3-ASSERTION_FAILED: Failed in File:[chars] Line:[dec]
Explanation PPM Process assertion has failed in File:[chars], at line:[dec].
Recommended Action No action is required.
Error Message PPM-3-CREATE_IF_FAILED: Running-config collection Failed for intf
range [chars]
Explanation The running-configuration collection has failed for :[chars].
Recommended Action No action is required.
Error Message PPM-3-IF_APPLY_FAILED: Config Apply Failed
Explanation The configuration apply has failed.
Recommended Action No action is required.
PRIVATE_VLAN Messages
This section contains the PRIVATE_VLAN messages.
PRIVATE_VLAN-5
Error Message PRIVATE_VLAN-5-PVLAN_ASSOC_DOWN_FAILED: Failed to bring down the
association between [dec] & [dec]
Explanation Association bringdown failed.
Recommended Action No action is required.
To Next Page
Loading...
