Send document comments to nexus7k-feedback-doc@cisco.com
2-100
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DEVICE-ALIAS Messages
Error Message DEVICE-ALIAS-3-VALIDATION_REJECTED: [chars]
Explanation Validation request received from remote switch is rejected. [chars] indicates the reason
for failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
DEVICE-ALIAS-6
Error Message DEVICE-ALIAS-6-CLEAR_FAILED_INFO: [chars]
Explanation An error has occurred while clearing the session. [chars] indicates the additional
information regarding failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-COMMIT_FAILED_INFO: [chars]
Explanation An error has occurred while committing the database. [chars] indicates the additional
information regarding failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DEVICE-ALIAS-6-IMPORT_DEFINITION_CONFLICT: Fcalias [chars] could not
be imported due to definition conflict
Explanation Fcalias [chars] could not be imported due to definition conflict. Either there is already
a device-alias configuration present with the same definition OR another VSAN specified in the
import VSAN range has an fcalias with the same definition.
Recommended Action Resolve the conflict and issue the import command again.
Error Message DEVICE-ALIAS-6-IMPORT_MEMBER_TYPE_CONFLICT: Fcalias [chars] could not
be imported due to having unsupported member type
Explanation Fcalias [chars] could not be imported due to having unsupported member types. Fcalias
can be imported only if it has Port WWN based members.
Recommended Action Make sure that the fcalias has Port WWN based members and issue the import
command again.
To Next Page
Loading...
Need help?
General
