Send document comments to nexus7k-feedback-doc@cisco.com
2-550
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
QOS Messages
Error Message QOS-2-MALLOC_ERROR: Size [dec] bytes
Explanation The QoS Manager could not allocate enough memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message QOS-2-PSS_ERROR: [chars]: PSS returned value=[dec]
Explanation The QoS Manager has detected an error while operating on a persistent storage
database.
Recommended Action No action is required.
Error Message QOS-2-STDOUT_ROTATE_FAILURE: Failed to rotate stdout file: [chars]
Explanation The QoS Manager has failed to rotate its current stdout file with filename [str.]. The file
size could grow beyond its maximum limit.
Recommended Action No action is required.
QOS-3
Error Message QOS-3-ALLOCFAIL: Heap Memory allocation failed: [chars]
Explanation QoS Manager is out of dynamic memory. [chars] specifies the context where the failure
occurred.
Recommended Action No action is required.
Error Message QOS-3-DBERROR: [chars]
Explanation QoS Manager encountered a database error. [chars] specifies the context where the
failure occurred.
Recommended Action No action is required.
Error Message QOS-3-E_PORT_ACL_FAILURE: Failed to [chars] QOS ACL for interface
[chars] (ACL return code=[hex])
Explanation The QoS Manager has failed to program or erase QoS related ACL when an E-Port
came up or went down for the interface [str.]. The error code returned by ACL module is [int.].
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
