Send document comments to nexus7k-feedback-doc@cisco.com
2-39
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ASCII-CFG Messages
ASCII-CFG Messages
This section contains the ASCII-CFG messages.
ASCII-CFG-2
Error Message ASCII-CFG-2-ACFG_CONFIGURATION_APPLY_ERROR: Error encountered while
Ascii configuration was being applied. Please use show startup-config log to view
details
Explanation At least one command failed while the ASCII configuration was being applied.
Recommended Action No action is required.
Error Message ASCII-CFG-2-ACFG_LIB_INVOKE_ERR: Ascii config library invocation
error: [chars]
Explanation The system has has detected an error while the library function was being invoked to
display the ASCII configuration.
Recommended Action No action is required.
Error Message ASCII-CFG-2-ACFG_OPER_FAIL: Operation failed because of [chars]
Explanation An operation has failed.
Recommended Action No action is required.
Error Message ASCII-CFG-2-ACFG_ROLLBACK_FAILED: rollback operation failed for
atomic option
Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web
site http://www.cisco.com/tac.
Recommended Action Rollback.
Error Message ASCII-CFG-2-ACFG_ROLLBACK_FAILED: Rollback to checkpoint [chars]
Failed, Going to undo the changes (atomic option)
Explanation Rollback operation failed for atomic option.
Recommended Action No action is required.