Send document comments to nexus7k-feedback-doc@cisco.com
2-270
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IP Messages
Error Message IP-3-INIT_FAILED: Initialization failed. Component [chars]
Explanation The system has detected that the service has failed to start. The failure occurred while
initializing the component [chars].
Recommended Action Enter the show processes command to check the status of the other processes,
debug the specified component.
Error Message IP-3-INVALID_IF_INDEX Format: Invalid interface index received from
%d
Explanation An invalid interface index has been received.
Parameters: Thread Name ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IP-3-IP_CLIENT_GET Format: HA client filter recovery failed (%d)
Explanation HA client filter recovery failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IP-3-IP_CLNT_FAILURE Format: Invalid IP registration reply. Message
major type %d, minor type %d
Explanation An IP client has failed in the registration process with IP.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IP-3-IP_FAILURE Format: Failed to %s
Explanation A critical operation has failed in the IP process.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IP-3-IP_HA_UPDATE Format: HA update failed (%d)
Explanation HA update failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
