Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-805
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
VRRP-CFG Messages
VRRP-CFG-3
Error Message VRRP-CFG-3-INIT_FAILED: Initialization failed. Component [chars]
Explanation The system has detected that the service has failed to start. The failure occurred while
initializing the component [chars].
Recommended Action Enter the show processes command to check the status of the other processes,
debug the specified component.
Error Message VRRP-CFG-3-VRRP_FEATURE_MANAGER_ERROR: Error in feature manager
operation
Explanation The feature manager operation had an error.
Recommended Action Check the reason for error using feature manager and fix the problem.
VRRP-CFG-5
Error Message VRRP-CFG-5-STARTING: VRRP Manager service started
Explanation The service successfully started.
Recommended Action No action is required.
Error Message VRRP-CFG-5-VR_ADMIN_DOWN: VR [chars]group [dec] on interface [chars]
is administratively down
Explanation The specified VRRP group is administratively down on interface [chars].
Recommended Action No action is required.
Error Message VRRP-CFG-5-VR_ADMIN_UP: VR [chars]group [dec] on interface [chars] is
administratively up
Explanation The specified VRRP group is administratively up on interface [chars].
Recommended Action No action is required.
Error Message VRRP-CFG-5-VR_CREATED: VR [chars]group [dec] created on interface
[chars]
Explanation The specified VRRP group has been successfully created on interface [chars].
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English