Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-567
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RIP Messages
Error Message RIB-4-WARN: [chars]
Explanation RIB igored the unexpected condition.
Recommended Action Enter 'debug RIB all', then recreate the operation scenario, to find out more
details.
RIB-5
Error Message RIB-5-NOTE: [chars]
Explanation RIB does not support this operation.
Recommended Action Enter 'debug RIB all', then recreate the operation scenario, to find out more
details.
RIB-6
Error Message RIB-6-INFO: [chars]
Explanation RIB event occurred.
Recommended Action No action is required.
RIP Messages
This section contains the RIP messages.
RIP-2
Error Message RIP-2-STARTUP_DEBUG Format: %s
Explanation A startup debug of rip process RIP process
Parameters: Event ...
Recommended Action No action is required.
Error Message RIP-2-STARTUP_FAILURE Format: Failed to %s during startup
Explanation A critical operation has failed during startup of the RIP process
Parameters: Event ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English