Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-230
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FWM Messages
Error Message FSPF-6-VSAN_OPER_DOWN: Down on vsan
Explanation FSPF has become operationally down on VSAN.
Recommended Action No action is required.
Error Message FSPF-6-VSAN_OPER_UP: Up with local domain [dec]
Explanation FSPF has started with local domain [dec].
Recommended Action No action is required.
FSPF-7
Error Message FSPF-7-ROUTE_THREAD_STARTED: Thread number [dec] started
Explanation Route computation thread number [dec] has been started for FSPF.
Recommended Action No action is required.
FWM Messages
This section contains the FWM messages.
FWM-0
Error Message FWM-0-FCFIB_EMERG: [chars]
Explanation Fcfib caused a system failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
FWM-1
Error Message FWM-1-FCFIB_ALERT: [chars]
Explanation Fcfib caused failures in other services.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English