Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-402
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
MSDP Messages
Error Message MRIB-6-USAGE Format: Usage: mrib [-h] [-d] [-m <memory-in-mb>]
Explanation Usage for starting MRIB process.
Recommended Action No action is required.
MSDP Messages
This section contains the MSDP messages.
MSDP-2
Error Message MSDP-2-NO_ENQUEUE Format: Unable to enqueue send element for peer %s
Explanation The MSDP process has failed to send a message over the TCP socket to peer.
Parameters: Peer IP address ...
Recommended Action No action is required.
Error Message MSDP-2-NO_LISTEN_SOCKET Format: Fatal error, can't get listen socket
setup in %s
Explanation The MSDP process has failed to obtain TCP packet.
Parameters: Function name ...
Recommended Action Dump core, and and and then restart component.
Error Message MSDP-2-OUT_OF_SYNC_TCP_LEN Format: TCP data stream may be out of sync,
suspect TLV length of %d from peer %s
Explanation MSDP process received invalid packet length from peer.
Parameters: TLV length, Peer IP address ...
Recommended Action No action is required.
Error Message MSDP-2-OUT_OF_SYNC_TCP_TYPE Format: TCP data stream may be out of
sync, suspect TLV type of %d from peer %s
Explanation MSDP process received malformed TLV from peer.
Parameters: TLV type, Peer IP address ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English