Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-401
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
MRIB Messages
Error Message MRIB-3-WRLOCK_ASSERT Format: %s:%d: Assert, write-lock not acquired
Explanation Caller Failed to get MRIB Shared Memory write lock
Parameters: Function Name, Line ...
Recommended Action No action is required.
MRIB-5
Error Message MRIB-5-API_INIT_SEM_CLEAR Format: Cleared the API semaphore from %d
Explanation The API semaphore was in an unexpected state, and was restored to a correct value.
Parameters: Value of semaphore ...
Recommended Action No action is required.
Error Message MRIB-5-RES_MGR_CHANGE Format: Changed m4route-mem from (%d, %d) to
(%d, %d)
Explanation The requested limit-resource command was adapted to fit the limits in this version.
Parameters: Requested Min, Requested Max, New Min, New Max ...
Recommended Action No action is required.
MRIB-6
Error Message MRIB-6-MEMORY_OPTION Format: memory size must be >= 16MB and <= 2GB
Explanation Invalid memory size specified for MRIB process.
Recommended Action No action is required.
Error Message MRIB-6-SHUTDOWN Format: Shutting down MRIB process
Explanation MRIB process is shutting itself down.
Recommended Action No action is required.
Error Message MRIB-6-SHUTDOWN_FAILED Format: Shutting down of MRIB process failed:
%s
Explanation MRIB process is shutting itself down.
Parameters: Error String ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English