Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-188
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCC_LC Messages
Error Message FCC_LC-2-SHUTDOWN: Process shutting down: [chars]
Explanation FCC_LC Process is shutting down.
Recommended Action No action is required.
Error Message FCC_LC-2-UNABLE_READ_DATA: Unable to read fcc data ([chars])
Explanation FCC is unable to read and process relevant FCC data.
Recommended Action No action is required.
FCC_LC-5
Error Message FCC_LC-5-BAD_MSG: Received bad message: [chars]
Explanation FCC_LC has received a malformed/unrecognized message.
Recommended Action No action is required.
Error Message FCC_LC-5-DISABLE: FCC_LC has been disabled
Explanation FCC_LC has been disabled.
Recommended Action No action is required.
Error Message FCC_LC-5-ENABLE: FCC_LC has been enabled
Explanation FCC_LC has been enabled.
Recommended Action No action is required.
Error Message FCC_LC-5-STARTING: FCC_LC process started
Explanation Process started successfully.
Recommended Action No action is required.
FCC_LC-6
Error Message FCC_LC-6-PRIO_UPDATE: Updated enable priority to [dec]
Explanation FCC_LC is active for packets with priority <= [threshold].
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English