Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-107
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DFTM Messages
DFTM Messages
This section contains the DFTM messages.
DFTM-3
Error Message DFTM-3-DFTM_BDDB_PROG_FAILED: DFTM failed to program BDDB Entry:
[chars]
Explanation DFTM failed to program BDDB Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_BDT_PROG_FAILED: DFTM failed to program BD Table Entry:
[chars]
Explanation DFTM failed to program BD Table Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_L2L3CT_PROG_FAILED: DFTM failed to program L2L3
Consistency Table Entry: [chars]
Explanation DFTM failed to program L2L3 Consistency Table Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_MFT_PROG_FAILED: DFTM failed to program Multicast FTag
Table Entry: [chars]
Explanation DFTM failed to program Multicast Ftag Table Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_SDT_PROG_FAILED: DFTM failed to program SGT DGT Table
Entry: [chars]
Explanation DFTM failed to program SGT DGT Table Entry.
Recommended Action No action is required.
Error Message DFTM-3-DFTM_VTT_PROG_FAILED: DFTM failed to program VLAN Translation
Table Entry: [chars]
Explanation DFTM failed to program VLAN Translation Table.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English