Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-440
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
OSPF Messages
OSPF-6
Error Message OSPF-6-DECONFIG_SHUTDOWN Format: OSPF shutting self down via
deconfiguration
Explanation OSPF process is shutting itself down due to the deconfiguration command.
Recommended Action No action is required.
Error Message OSPF-6-HA_DB_REBUILD Format: HA run-time database buildup %s
Explanation OSPF stateful restart status
Parameters: Action ...
Recommended Action No action is required.
Error Message OSPF-6-HA_STATEFUL Format: Stateful HA %s
Explanation OSPF stateful restart status
Parameters: Action ...
Recommended Action No action is required.
Error Message OSPF-6-MTS_UNKNOWN_MSG Format: Received unknown MTS message with
opcode %d, dropping it
Explanation OSPF received an unknown MTS message. The message will be dropped
Parameters: MTS Opcode ...
Recommended Action No action is required.
Error Message OSPF-6-SHUTDOWN_REQUEST_FAIL Format: OSPF shutdown request failed, %s
Explanation OSPF request to system mananger for permission to shutdown was turned down.
Parameters: Error ...
Recommended Action No action is required.
Error Message OSPF-6-START Format: Starting OSPF %s, %s
Explanation OSPF process is starting due to the specified reason.
Parameters: Process name, Reason ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English