Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-245
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ICMPV6 Messages
Error Message ICMPv6-3-GROUP_RANGE_IGNORE Format: Too many Groups in Group Range %s
- %s
Explanation The system has detected that the Group Range yields too many groups.
Parameters: Start Group, End Group ...
Recommended Action No action is required.
Error Message ICMPv6-3-MBUF_OP_FAILED Format: %s for size %d failed in %s()
Explanation An unexpected but manageable event has occurred.;.
Recommended Action No action is required.
Error Message ICMPv6-3-MQ_FAILED Format: %s failed, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.;.
Recommended Action No action is required.
Error Message ICMPv6-3-MQ_FAILED_NAME Format: %s failed for client %s, errno: %s in
%s()
Explanation An unexpected but manageable event has occurred.;.
Recommended Action No action is required.
Error Message ICMPv6-3-MQ_FAILED_PID Format: %s failed to client pid: %d, errno: %s
in %s()
Explanation An unexpected but manageable event has occurred.;.
Recommended Action No action is required.
Error Message ICMPv6-3-MSG_TO_TLV Format: TLV Conversion failed (%d)
Explanation TLV conversion failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message ICMPv6-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
Explanation ICMPv6 called an MTS API which returned an error.
Recommended Action Dump core, and and and then restart component.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English