Send document comments to nexus7k-feedback-doc@cisco.com
2-242
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
HSRP_ENGINE Messages
HSRP_ENGINE-6
Error Message HSRP_ENGINE-6-ACTIVE_CHANGE: Interface [chars] [chars] Grp [dec]
Active router is [chars]
Explanation The Active router for the group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-ACTIVEROUTERPRIORITY: Interface [chars] [chars] Grp
[dec] Active router priority changed to [dec]
Explanation The priority of the Active router for the group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-GRPSTATECHANGE: Interface [chars] [chars] Grp [dec]
state changed from [chars] to [chars] reason [chars]
Explanation The HSRP router has changed its state.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-MACADDRESS_CHANGE: Interface [chars] [chars] Grp [dec]
mac-address changed to [chars]
Explanation The MAC address of the group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-PRIORITY: Interface [chars] [chars] Grp [dec] priority
changed to [dec]
Explanation The current priority of the HSRP group has changed.
Recommended Action No action is required.
Error Message HSRP_ENGINE-6-STANDBY_CHANGE: Interface [chars] [chars] Grp [dec]
Standby router is [chars]
Explanation The Standby router for the group has changed.
Recommended Action No action is required.