Send document comments to nexus7k-feedback-doc@cisco.com
2-834
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ZONE Messages
Error Message ZONE-2-LZ_MALLOC_ERROR: Size [dec] bytes
Explanation The LUN/Read-only zoning process could not allocate enough memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message ZONE-2-ZS_ALIAS_LIMIT_EXCEEDED: The limit for maximum number of
aliases exceeded
Explanation The number of aliases configured has exceeded the maximum number of aliases
allowed per VSAN Due to this, distRIBution or merge operation may fail.
Recommended Action Make sure the number of aliases is less than the maximum allowed in a VSAN.
Error Message ZONE-2-ZS_ATTR_GROUP_LIMIT_EXCEEDED: The limit for maximum number of
attribute groups exceeded
Explanation The number of attribute groups configured has exceeded the maximum number of
attribute groups allowed in a VSAN Due to this, distribution or merge operation may fail.
Recommended Action Make sure the number of attribute groups is less than the maximum allowed
in a VSAN.
Error Message ZONE-2-ZS_CHANGE_ACA_FAILED: ACA failed : [chars]
Explanation Zone Server cannot acquire change authorization : [chars].
Recommended Action Verify the interoperability mode on all the switches OR retry later.
Error Message ZONE-2-ZS_CHANGE_ACQUIRE_AUTH_FAILED: Acquire authorization failed on
VSAN [dec]
Explanation Zone Server cannot acquire authorization on VSAN [dec].
Recommended Action No action is required.
Error Message ZONE-2-ZS_CHANGE_ACTIVATION_FAILED: Activation failed
Explanation Zone Server cannot activate the zone set.
Recommended Action No action is required.
Error Message ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN: Activation failed : reason
[chars]
Explanation Zone Server cannot activate due to reason [chars].
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
