Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-470
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM6 Messages
Error Message PIM6-6-PRESERVE_ROUTES Format: Preserving routes from last
instantiation
Explanation PIM6 is restoring the routes it had added in previous instance.
Recommended Action No action is required.
Error Message PIM6-6-RESERVE_LIMIT_WARNING Format: Exceeded 80% of the
reserve-limit for VRF %s
Explanation Exceeded 80% of the reserve-limit for VRF
Parameters: VRF ...
Recommended Action No action is required.
Error Message PIM6-6-RESTART_SHUTDOWN Format: PIM6 shutting self down via restart
command
Explanation PIM6 process is shutting itself down due to the restart command.
Recommended Action No action is required.
Error Message PIM6-6-SHUTDOWN Format: Shutting down PIM6 process
Explanation PIM6 received a shutdown request.
Recommended Action No action is required.
Error Message PIM6-6-SHUTDOWN_SELF Format: PIM6 shutting self down
Explanation PIM6 process is shutting itself down.
Recommended Action No action is required.
Error Message PIM6-6-STATE_LIMIT_WARNING Format: Exceeded 80% of the state-limit
for VRF %s
Explanation Exceeded 80% of the state-limit for VRF
Parameters: VRF ...
Recommended Action No action is required.
Error Message PIM6-6-UNKNOWN_OPC Format: Received unknown mts opcode %d
Explanation PIM6 process received unknown Interprocess message, dropped.
Parameters: MTS Opcode ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English