Send document comments to nexus7k-feedback-doc@cisco.com
2-536
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT_SECURITY Messages
PORT_SECURITY-3
Error Message PORT_SECURITY-3-BINDING_CONFLICT: [chars]
Explanation An already logged in device is in conflict with the PSM active binding configurations.
[chars] indicates the WWN of the login entity, interface.
Recommended Action For port-security, the auto-learn feature can be used with activation to prevent
this. This violating device or switch will be logged out.
Error Message PORT_SECURITY-3-BINDING_VIOLATION: [chars]
Explanation A login happened that violates PSM binding configurations [chars] indicates the WWN
of the login entity.
Recommended Action Only entries in the activated database of PSM can login. Change the config
and activate it again.
Error Message PORT_SECURITY-3-DB_ERR: [chars]
Explanation An error has occurred during an PSM database operation. [chars] indicates the reason
for the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PORT_SECURITY-3-EFMD_FC2_OPER_FAILED: [chars]
Explanation EFMD fc2 operation failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PORT_SECURITY-3-EFMD_INIT_FAILED: [chars]
Explanation EFMD init failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PORT_SECURITY-3-EFMD_MERGE_UNKNOWN_FORMAT: [chars]
Explanation Received a corrupted EFMD Request Packet.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
