Send document comments to nexus7k-feedback-doc@cisco.com
2-801
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
VPM Messages
VPM-3
Error Message VPM-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars]
Explanation Could not send PSS Sync. notification to Standby Supervisor. PSS Type=[str.]
Operation=[.str] Key=[Str.].
Recommended Action No action is required.
Error Message VPM-3-SEND_TO_ILC_FAILED: [chars]
Explanation The VP Manager could not send to ILC for DG=[chars], at slot=[dec] processor=[dec]
and SAP=[dec].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message VPM-3-SEND_TO_SNMP_AGENT_FAILED: [chars]
Explanation The VP Manager could not send to SNMP Agent for DG=[chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message VPM-3-UNKNOWN_MSG: Recvd. from Node=[dec] SAP=[dec]
Explanation The VP Manager has received an unknown message from [dec]].[dec]. This information
is for debugging only.
Recommended Action No action is required.
Error Message VPM-3-VPM_PSS_CORRUPTED: [chars] PSS found corrupted
Explanation The VP Manager has detected a corrupted file in its persistent information databases
The database would be recreated.
Recommended Action No action is required.
VPM-4
Error Message VPM-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec]
Explanation There was a version mismatch between the VP Manager and one of its persistent
storage databases. The persistent information has been translated to the new format.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
