Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-527
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT-SECURITY Messages
Error Message PORT-RESOURCES-5-INVALID_PORT_ACTIV_PKG_LICENSE_FILE_INSTALLED:
Invalid on demand port activation license file is installed for module [dec]
(number of port licenses = [dec])
Explanation Interfaces may not acquire port activation licenses during installation.
Recommended Action Install a valid port activation license file.
PORT-SECURITY Messages
This section contains the PORT-SECURITY messages.
PORT-SECURITY-2
Error Message PORT-SECURITY-2-ALLOC_FAILED: Memory allocation failed for size:[dec]
for [chars]
Explanation Memory allocation failed for size [dec] for [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PORT-SECURITY-2-FEATURE_DISABLED: Feature [chars] disabled due to
[chars]
Explanation Feature [chars] is unavailable and will be disabled now.
Recommended Action Install the correct license and reenable.
PORT-SECURITY-3
Error Message PORT-SECURITY-3-BINDING_CONFLICT: [chars]
Explanation An already logged in device is in conflict with the PSM active binding configurations.
[chars] indicates the WWN of the login entity, interface.
Recommended Action For port-security, the auto-learn feature can be used with activation to prevent
this. This violating device or switch will be logged out.
Error Message PORT-SECURITY-3-BINDING_VIOLATION: [chars]
Explanation A login happened that violates PSM binding configurations [chars] indicates the WWN
of the login entity.
Recommended Action Only entries in the activated database of PSM can login. Change the config
and activate it again.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English