Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-43
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ATIMERS Messages
Error Message ASCII-CFG-6-INFORMATION: [chars]
Explanation An error has occurred that affects Acfg-Rollback. [chars] indicates the event.
Recommended Action No action is required.
Error Message ASCII-CFG-6-PSS_ERR: [chars]
Explanation An error has occurred during an Acfg PSS operation. [chars] indicates the PSS
operation that caused the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
ATIMERS Messages
This section contains the ATIMERS messages.
ATIMERS-3
Error Message ATIMERS-3-ERROR Format: %s
Explanation An active timer API has detected an error
Parameters: Error ...
Recommended Action No action is required.
Error Message ATIMERS-3-OPER Format: timer failed to %s, error %s
Explanation An active timer API has detected an error
Parameters: timer operation, reason ...
Recommended Action No action is required.
Error Message ATIMERS-3-START Format: starting timer 0x%p: heap not allocated for
set id %u
Explanation An active timer API has detected an error
Parameters: timer, Set ID ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English