Send document comments to nexus7k-feedback-doc@cisco.com
2-226
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FSPF Messages
Error Message FSPF-3-INTF_TIMER_ERR: Error in processing interface timer event
[chars] for interface [chars] , error = [chars]
Explanation FSPF had an error in processing timer event for the interface chars, error is [chars].
Recommended Action Provide output of 'debug fspf error'.
Error Message FSPF-3-IPC_PROC_ERR: Error in processing IPC message : Opcode = [dec],
Error code = [hex]
Explanation FSPF had an error in processing message of [dec] opcode , the internal error code is
[dec].
Recommended Action Possibly some wrong IPC message is received by FSPF . Provide output of
'debug fspf mts pkt' and 'debug fspf error ' trace.
Error Message FSPF-3-LOCK_FAIL: FSPF failure in gaining lock
Explanation There is a software failure in gaining lock of the shared resource between FSPF threads.
Recommended Action Provide output of 'debug fspf all '.
Error Message FSPF-3-MTS_MSG_BEFORE_GSYNC: FSPF in standby received MTS message
opcode = [hex] before GSYNC
Explanation FSPF in standby received an MTS message of opcode [dec] before receiving the
GSYNC message.
Recommended Action Provide output of 'debug fspf mts pkt '.
Error Message FSPF-3-RIB_ERR: Error in RIB : [chars]
Explanation FSPF had an error in interacting with RIB, error description is [chars].
Recommended Action Check if RIB application is running using 'show processes'. Provide output of
'debug fspf route' and RIB debug traces.
Error Message FSPF-3-ROUTE_COMPUTE_ERR: Error in computing or sending routes : Error
= [chars]
Explanation FSPF had an error in computing routes , error description is [chars].
Recommended Action Provide the error code and output of 'debug fspf error' and 'debug fspf route'
if problem is reproducible.
To Next Page
Loading...
Need help?
General
