Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-629
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SVC Messages
SVC Messages
This section contains the SVC messages.
SVC-0
Error Message SVC-0-NODE_EMERG_MSG: [chars]
Explanation Syslog message from a SVC interface node.
Recommended Action No action is required.
SVC-1
Error Message SVC-1-NODE_ALERT_MSG: [chars]
Explanation Syslog message from a SVC interface node.
Recommended Action No action is required.
SVC-2
Error Message SVC-2-NODE_CRIT_MSG: [chars]
Explanation Syslog message from a SVC interface node.
Recommended Action No action is required.
Error Message SVC-2-SVC_SYSLOG_INIT_FAILED: Initialization failed for SVC: [chars],
Reason: [hex]
Explanation Initialization failed for SVC.
Recommended Action No action is required.
Error Message SVC-2-SVC_SYSLOG_NO_PORT_CHAN: Too many PortChannels allocated by
user for interface [chars]
Explanation SVC interface needs port channels to operate. Too many port channels have been
allocated by the user for the interface to operate correctly.
Recommended Action Delete unneeded user configured port channels and shutdown the SVC
interface. Once complete, please bring the SVC interface back up.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English