Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-628
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
STP Messages
Error Message STP-6-PORT_PRIORITY: Port [chars] instance [chars] priority changed
to [dec]
Explanation The spanning tree port priority has changed for the specified port.
Recommended Action No user action is required.
Error Message STP-6-PORT_ROLE: Port [chars] instance [chars] role changed to [chars]
Explanation The spanning tree port role has changed for the specified port.
Recommended Action No user action is required.
Error Message STP-6-PORT_STATE: Port [chars] instance [chars] moving from [chars]
to [chars]
Explanation The Spanning-Tree port has changed its state.
Recommended Action No user action is required.
Error Message STP-6-PRESTD_NEIGH: This switch has received a pre-standard MST BPDU
on port [chars]: Invoking pre-standard MST BPDU transmission on this port.
Explanation The switch has received a pre-standard MST BPDU on a port. The switch will
automatically adjust its mode of operation on this port and will start sending pre-standard BPDUs.
Recommended Action No user action is required.
Error Message STP-6-ROOT: Root bridge for [chars] changed to [chars]
Explanation The spanning tree root bridge has changed.
Recommended Action No user action is required.
Error Message STP-6-SERVICE_UP: Initialized [chars]
Explanation STP line 2.
Recommended Action No action is required.
Error Message STP-6-STATE_CREATED: Internal state created [chars]
Explanation STP has created its internal state stateless/stateful [chars].
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English