Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-501
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PMALLOC Messages
Error Message PM-6-MTS_UNKNOWN_MSG Format: Received unknown MTS message with opcde
%d, dropping it
Explanation PM received an unknown message. The message is dropped.
Recommended Action No action is required.
Error Message PM-6-VDC_MEMB_GET Format: HA vdc-membership recovery failed (%d)
Explanation HA vdc-membership recovery failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
PMALLOC Messages
This section contains the PMALLOC messages.
PMALLOC-3
Error Message PMALLOC-3-BITMAP_MEM_CHECK Format: Failed to allocate bitmap for
memory checking in %s\n
Explanation In PMALLOC lib, process failed to allocate bitmap for memory check ing.
Parameters: Function name ...
Recommended Action No action is required.
Error Message PMALLOC-3-MALLOC_ENABLE_CHECKER Format: Malloc enable checker failed
in %s\n
Explanation In PMALLOC lib, process failed to turn on memory accesses.
Parameters: Function name ...
Recommended Action No action is required.
Error Message PMALLOC-3-MALLOC_ENABLE_CHECKER_INFO Format: %d bytes already
allocated\n
Explanation In PMALLOC lib, warn if some bytes have already been allocated.
Parameters: Number of bytes ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English