Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-303
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IPV6 Messages
Error Message IPv6-2-RECURSIVE_LOOP Format: Recursive loop in %s
Explanation There is a recursive function calling loop.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPv6-2-SDB_CREAT Format: Failed to create shared database
Explanation A component API call has failed in IPv6.
Recommended Action No action is required.
Error Message IPv6-2-SDB_DESTROY Format: Failed to destroy shared database
Explanation A component API call has failed in IPv6.
Recommended Action No action is required.
Error Message IPv6-2-SDB_OPEN Format: Failed to open shared database
Explanation A component API call has failed in IPv6.
Recommended Action No action is required.
IPV6-3
Error Message IPv6-3-BAD_CONTEXT Format: Bad context-id %d in %s
Explanation The context cannot be found.
Recommended Action No action is required.
Error Message IPV6-3-FILE_WRITE_FAILED: Writing to file [chars] failed - error:
[chars]
Explanation Writing to a file failed probably due to no space.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPv6-3-FRAME_GT_PAYLOAD Format: Frame length: %d greater than payload
length: %d plus IPv6 header length, truncating packet received on interface %s
Explanation Mismatch in the packet's frame length and payload field, trimmed.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English