Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-800
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
VPM Messages
VPM-2
Error Message VPM-2-GENERAL_ERROR: [chars]
Explanation The VP Manager has encountered a critical error. The description of the error is [str.].
Recommended Action No action is required.
Error Message VPM-2-MALLOC_ERROR: Size [dec] bytes
Explanation The VP Manager could not allocate enough memory.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message VPM-2-PSS_ERROR: [chars]
Explanation The VP Manager has detected an error while operating on a persistent storage database.
Recommended Action No action is required.
Error Message VPM-2-VPMON_CRIT: [chars] [dec]
Explanation VPMON daemon critical message.
Recommended Action No action is required.
Error Message VPM-2-VPMON_DPP_DOWNLOAD: HB failure, Restarting the DPP [dec]
Explanation VPMON daemon redownloading DPP(s).
Recommended Action ISAPI API users need to re-download config data to fast path.
Error Message VPM-2-VPMON_DPP_RELOAD_FORCE: Force reload of DPP(s) [chars]: [chars]
Explanation VPMON daemon critical action message.
Recommended Action No action is required.
Error Message VPM-2-VPMON_DPP_RELOAD_FORCE: Issuing of force reload to command for
DPP(s) [chars] is: [chars]
Explanation VPMON daemon critical action message.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English