Send document comments to nexus7k-feedback-doc@cisco.com
2-235
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
GLBP Messages
Error Message GLBP-3-GLBP_MAC_ADD_FAILED: fwd [dec] failed to add [chars] in mac
table
Explanation The system was unable to add the GLBP MAC address into the MAC addresss table.
Recommended Action Check syslog messages for L2FM failures and fix the problem.
Error Message GLBP-3-GLBP_MAC_ADD_FAILED: fwd [dec] failed to add [chars] in mac
table (error [hex])
Explanation The system was unable to add the GLBP MAC address into the MAC addresss table.
Recommended Action Check syslog messages for L2FM failures and fix the problem.
Error Message GLBP-3-GLBP_MAC_DEL_FAILED: fwd [dec] failed to delete [chars] in mac
table
Explanation The system was unable to delete the GLBP MAC address from the MAC addresss table.
Recommended Action Check syslog messages for L2FM failures and fix the problem.
Error Message GLBP-3-GLBP_MAC_DEL_FAILED: fwd [dec] failed to delete [chars] in mac
table (error [hex])
Explanation The system was unable to delete the GLBP MAC address from the MAC addresss table.
Recommended Action Check syslog messages for L2FM failures and fix the problem.
Error Message GLBP-3-GLBP_ROUTE_ADD_FAILED: failed to add [chars] in routing table
Explanation The system was unable to add the GLBP vIP address into the unicast routing table.
Recommended Action Check syslog messages for URIB failures and fix the problem.
Error Message GLBP-3-GLBP_ROUTE_DEL_FAILED: failed to delete [chars] in routing
table
Explanation The system was unable to delete the GLBP vIP address from the unicast routing table.
Recommended Action Check syslog messages for URIB failures and fix the problem.