Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-529
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT-SECURITY Messages
Error Message PORT-SECURITY-3-LEARNT_BINDING_CONFLICT: [chars]
Explanation An already logged in device that is learned during activation is in conflict with the PSM
active binding configurations. [chars] indicates the WWN of the login entity, interface.
Recommended Action Copy the active-db to config-db and reactivate. Not doing so could result in
unexpected login rejects later on that interface.
Error Message PORT-SECURITY-3-MTS_ERR: [chars]
Explanation An error has occurred in processing of an MTS message. [chars] indicates the error that
occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PORT-SECURITY-3-PSS_ERR: [chars]
Explanation An error has occurred during an PSM PSS operation. [chars] indicates the PSS
operation that caused the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PORT-SECURITY-3-PSS_VER_FAIL: PSS file [chars] has version
[dec].[dec].[dec], expected version [dec].[dec].[dec]
Explanation There was a mismatch in the PSS version. [chars] indicates the PSS service,
[dec].[dec].[dec] is the current version number, and [dec].[dec].[dec] is the expected version.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
PORT-SECURITY-4
Error Message PORT-SECURITY-4-ACTIVATION_FAIL: [chars]
Explanation Activation of bindings failed due to [chars].
Recommended Action Correct the error and reactivate it again.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English