Send document comments to nexus7k-feedback-doc@cisco.com
2-569
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RIP Messages
Error Message RIP-3-MQ_RCVD Format: %s thread - message queue receive failure (%d)
Explanation An error has occurred while trying to receive a message from another process
Parameters: Thread Name, Failure Reason ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RIP-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
Explanation RIP called an MTS API which returned an error.
Parameters: Error Number ...
Recommended Action No action is required.
Error Message RIP-3-MTS_RECV Format: Error returned from mts_recv(), errno: %s
Explanation RIP called an MTS API which returned an error.
Parameters: Error Number ...
Recommended Action No action is required.
Error Message RIP-3-POLICY_ERROR Format: %s
Explanation An error has occurred when processing policies
Parameters: Error ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RIP-3-PROCESS_STOP Format: Process shutting down: %s
Explanation RIP called a sysmgr API which returned an error.
Parameters: Stop Reason ...
Recommended Action No action is required.
Error Message RIP-3-SEND_FAILURE Format: Failed to send message. %s
Explanation The RAn IP process has failed to send a message to a neighbor
Parameters: Failure Reason ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
