Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-568
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RIP Messages
RIP-3
Error Message RIP-3-AUTH_SEND_FAILURE Format: %s %s
Explanation The RAn IP process has failed to send a message to a neighbor
Parameters: Failure Reason, Interface Name ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RIP-3-FAILURE Format: Failed to %s
Explanation A critical operation has failed in the RIP process
Parameters: Event ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RIP-3-GENERIC Format: %s
Explanation An error has occurred
Parameters: Error ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RIP-3-IM_DEL Format: IOD in IM delete message for %s (%d) mismatches
with RIP interface %p (iod %d)
Explanation There is a mismatch of interface IODs in IM and RIP
Parameters: Interface Name, Interface ID, Interface Name, Interface ID ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RIP-3-INTERNAL_ERROR Format: %s
Explanation An internal error has occurred in the RIP process
Parameters: Error ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English