Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-394
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
MRIB Messages
Error Message MRIB-2-RES_MGR Format: Error returned from %s, errno: 0x%08x (%s) in
%s()
Explanation The resource manager returned an error to MRIB, while MRIB was performing an
action relating to its shared memory
Parameters: RM Function, Error Code, Error Description, Calling Function ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message MRIB-2-STARTUP_FAILURE Format: Startup failure: %s
Explanation An unrecoverable software error has occurred during MRIB startup.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
MRIB-3
Error Message MRIB-3-ACTIVE_TIMER_FAILED Format: active_timer_create() failed for
mrib_main()
Explanation The MRIB process has failed to create a timer.
Recommended Action Dump core, then reload the stack.
Error Message MRIB-3-API_FAILED Format: %s failed
Explanation The MRIB process has failed in invoking an API.
Parameters: Function ...
Recommended Action No action is required.
Error Message MRIB-3-BITFIELD_FAILED Format: %s failed in %s
Explanation MRIB process could not execute the bitfield operation.
Parameters: Bitfield Operation, Function Name ...
Recommended Action Dump core, then reload the stack.
Error Message MRIB-3-CONTEXT_BF_FAILED Format: bitfield_create() failed for context
%s
Explanation The MRIB process has failed to create a bitfield for mRIB_ cibtype.
Parameters: Context Name ...
Recommended Action Dump core, then reload the stack.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English