Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-535
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT_SECURITY Messages
Error Message PORT_CHANNEL-7-START_STANDBY: started in standby mode
Explanation The system has detected a manager started in standby mode.
Recommended Action No action is required.
Error Message PORT_CHANNEL-7-START_STATEFUL: started statefully
Explanation The system has detected a manager started with running configuration.
Recommended Action No action is required.
Error Message PORT_CHANNEL-7-START_STATELESS: started statelessly
Explanation The system has detected a manager started with startup configuration.
Recommended Action No action is required.
PORT_SECURITY Messages
This section contains the PORT_SECURITY messages.
PORT_SECURITY-2
Error Message PORT_SECURITY-2-ALLOC_FAILED: Memory allocation failed for size:[dec]
for [chars]
Explanation Memory allocation failed for size [dec] for [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message PORT_SECURITY-2-FEATURE_DISABLED: Feature [chars] disabled due to
[chars]
Explanation Feature [chars] is unavailable and will be disabled now.
Recommended Action Install the correct license and reenable.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English