Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-812
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
VSAN Messages
VSAN-2
Error Message VSAN-2-PROGRAM_EXIT: process exiting with reason: [chars]
Explanation VSAN manager process is exiting with the reason [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
VSAN-3
Error Message VSAN-3-CFS_OPERATION_FAILED: cfs [chars] operation failed : [chars]
Explanation Cfs operation [chars1] has failed. [chars2].
Recommended Action Check the reason for the failure of the CFS operation and fix the problem.
Error Message VSAN-3-MEM_ALLOC_FAILED: alloc failed for size:[dec]
Explanation Memory allocation of size [dec] failed.
Recommended Action Do show process memory command to see memory usage of processes.
Error Message VSAN-3-MESSAGE_ERROR: could not handle message:[chars] of type [dec]
sent by addr [dec]:[dec]
Explanation Got an IPC message [chars] of type [dec1] sent by a component running on node [dec2]
with sap [dec3].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
VSAN-6
Error Message VSAN-6-ACTIVATED: VSAN:[dec] changing from suspended to active
Explanation Making VSAN with ID [dec] active from suspended state.
Recommended Action No action is required.
Error Message VSAN-6-CFS_MERGE_NOT_SUPPORTED: merging of fctimer configuration data
is not supported
Explanation Merging of fctimer configuration data using cfs is not supported.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English