Send document comments to nexus7k-feedback-doc@cisco.com
2-369
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
LICMGR Messages
Error Message LIBGD-6-HW_INIT: GuardianHW initialization has been done for inst:
[dec] port: [dec]
Explanation Guardian HW initializtion has been called[dec].
Recommended Action No action is required.
LICMGR Messages
This section contains the LICMGR messages.
LICMGR-2
Error Message LICMGR-2-LOG_LIC_EXIT: License manager exiting: [chars]
Explanation License manager exiting.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message LICMGR-2-LOG_LIC_GRACE_EXPIRED: Grace period expired for feature
[chars].
Explanation Unlicensed feature [chars] has exceeded its grace time period. Applications using will
be shut down immediately.
Recommended Action Install the license file to continue using the feature.
Error Message LICMGR-2-LOG_LIC_INVALID_SERVER_LINE: License file [chars] contains
invalid SERVER line. Contact TAC
Explanation Invalid SERVER line in license file.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message LICMGR-2-LOG_LIC_NVRAM_DISABLED: Licensing NVRAM is not available.
Grace period will be disabled: [chars]
Explanation The Supervisor NVRAM block may have a hardware problem and may need to be
replaced.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.