Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-45
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
BGP Messages
Error Message BGP-2-APIINIT Format: Unable to initialize %s API
Explanation An unrecoverable error has occurred during BGP initialization.
Parameters: Server Name ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message BGP-2-APIMTSBIND Format: Unable to bind to MTS SAP for %s, sap %d: %s
Explanation BGP client was not able to create a message queue for communication.
Parameters: Queue name, MTS SAP, Error ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message BGP-2-ATTACH Format: Unable to attach to %s
Explanation An unrecoverable error has occurred during BGP initialization.
Parameters: Server Name ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message BGP-2-IPV6REG Format: Unable to register with IPv6
Explanation An unrecoverable error has occurred during BGP initialization.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message BGP-2-MQLOOP_INIT Format: Message queue loop %s, %s, Error - %s
Explanation An unrecoverable error has occurred during BGP initialization.
Parameters: MQLoop Type, Failure Type, Error ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message BGP-2-MTSBIND Format: Unable to bind to MTS SAP for %s, sap %d: %s
Explanation BGP was not able to create a message queue for communication.
Parameters: Queue name, MTS SAP, Error ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message BGP-2-PEERSHALTED Format: BGP %s shutdown due to no memory condition
(%s)
Explanation The system may be low on memory.
Parameters: Peer(s), Error ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English