Send document comments to nexus7k-feedback-doc@cisco.com
2-298
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IPS_SB_MGR-SLOT# Messages
Error Message IPS_SB_MGR-SLOT#-2-NODE_REIMAGE_PREPARE_FAIL: [Node [dec]]: Disk
formatting failed during node install
Explanation There was a problem during the partitioning of disk and creation of file systems during
node install.
Recommended Action Potential node software issue. Contact the Cisco Technical Assistance Center
(TAC) through the Cisco Support web site http://www.cisco.com/tac.
Error Message IPS_SB_MGR-SLOT#-2-PORT_SOFTWARE_FAILURE: Port software failure,
module [dec] port [dec]
Explanation The software servicing the data path on the port has failed.
Recommended Action No action is required.
IPS_SB_MGR-SLOT#-3
Error Message IPS_SB_MGR-SLOT#-3-COMP_FAILURE: Heartbeat failure in compression
engine (error [hex])
Explanation The compression engine did not respond to heartbeats, due to some failure. SAN-OS
will restart the compression engine to clear the problem.
Recommended Action No action is required.
Error Message IPS_SB_MGR-SLOT#-3-CRYPTO_FAILURE: Heartbeat failure in encryption
engine (error [hex])
Explanation The encryption engine did not respond to heartbeats, due to some failure. SAN-OS will
restart the encryption engine to clear the problem.
Recommended Action No action is required.
IPS_SB_MGR-SLOT#-4
Error Message IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_ADD_ON: svc-node[dec] image
is not compatible with svclc image
Explanation The svc image on the node is not compatible with the add on image running on the line
card.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
